Transfixation of the IP joint with a K-wire is indicated if the joint remains unstable after closed reduction.
The commonest risk of percutaneous K-wire immobilization is infection.
Breakage of the K-wire at the level of the IP joint can be avoided by using a wire of 1.2 or 1.4 mm diameter and counseling the patient to avoid stresses at the IP joint. The K-wire should be protected with a splint.
This procedure is usually performed with the patient in a supine position with the arm on a radiolucent side table.
Most dorsal dislocations can be reduced by applying traction, flexion, and dorsal pressure on the base of the distal phalanx.
If the joint is stable and the flexor pollicis longus function is intact after reduction, nonoperative treatment is usually indicated.
In the case of a palmar dislocation, apply traction and extension. Then apply pressure with the thumb on the palmar aspect of the base of the distal phalanx.
In palmar dislocation the terminal extensor tendon is usually disrupted.
If the joint is stable after reduction, nonoperative treatment is usually indicated.
To avoid unnecessary radiation from image intensification, mark the planned track of the K-wire on the distal phalanx in both the AP and the lateral aspects.
Insert the K-wire through the tip of the distal phalanx up to the IP joint.
Carefully reduce the joint by extending the IP joint.
The K-wire may be used as a reduction tool.
Confirm IP joint reduction with an image intensifier in the lateral view.
Advance the K-wire across the IP joint into the proximal phalanx as far as its base. Be careful not to penetrate the MCP joint.
Cut the K-wire so that it protrudes through the skin.
Leaving the K-wire to protrude through the skin in this way has the advantage of its being easy to remove. The disadvantages are patient discomfort and risk of pin-track infection.
Make sure that the bent end does not irritate or compress the skin.
Apply an IP joint splint, leaving the MCP joint free, to protect the K-wire from breakage.
A custom thermoplastic splint has the advantage that it is adapted better to the shape of the thumb and is easier to change.
The aftercare can be divided into four phases of healing:
Full details on each healing phase can be found in the chapter Postoperative treatment of thumb injuries.
The splint allows for movement at the MCP joint and helps with pain and edema control. The arm should be actively elevated to help reduce the swelling.
Hand therapy is recommended to prevent soft-tissue atrophy and joint contracture, which leads to a poor outcome, and subsequent treatment is difficult.
Functional exercises of the nonimmobilized joints should be started immediately to keep uninjured joints mobile.
Active motion of the IP joint is permitted after removal of the K-wire.
Duration of joint transfixation depends on the lesion type.
The K-wire can be removed after 6 weeks with bony avulsions.
The K-wire can be removed after 8 weeks with tendinous avulsions.